Northern Telecom NAC Installation Manual page 267

8-10 Software reinstallations and upgrades
Procedure 8-1 (continued)
Software reinstallation or upgrade to a NAC 2 system
Step Installer's action and system's response
The system then displays a menu.
Note: Only those reentry points that have been verified by your system are shown in
the NAC Installation/Upgrade Restart Menu.
The NAC Installation/Upgrade Restart Menu
-––––––––––––––––––––––––––––––––––––––––
Restart NAC 2 Installation/Upgrade from one of the following stages:
1 From the Beginning
2 Just Before Copying OS Files to Hard Disk
3 Just Before Copying NAC Application Files to Hard Disk
4 Just Before Booting From Hard Disk
––> Enter a number to select the stage from which to install,
or enter q to quit:
23 If you want to quit, enter q, followed by {RETURN}. The system returns you to the
NAC Software Installation Menu, from where you can restart the installation.
If you want to restart the installation from the beginning, enter 1, followed by {RE-
TURN}. The system displays the following message.
You have chosen to start the NAC 2 install/upgrade from the beginning.
If you want to restart the installation just before the OS files are copied to the hard
disk, enter 2, followed by {RETURN}. The system displays the following message.
You have chosen to start the NAC 2 install/upgrade at the
point where the OS files are about to be copied to the hard drive.
553-4011-110 Standard 1.0 November 1994
—continued—