Northern Telecom NAC Installation Manual page 206

Procedure 6-1 (continued)
New installation of the NAC 2 system: customer-installed software
Step Installer's action and system's response
167 SCSI configuration
Device Addr Vers
–––––– –––– –––– –––––––– –––––––
Disk 00
Tape 40
This configuration is an example. Your system messages may differ.
Enter the correct date and time EST [mmddhhmmyy]:
7 Enter the correct date and time, where the first pair of numbers represent the month,
the second pair of numbers represent the day, the third pair represent the hour in the
24-hour time cycle, the fourth pair of numbers represent the minutes, and the last
pair of numbers represent the last two digits of the year. For example, if 0211152594
was entered, the system would ask you the following question.
Is the date Fri Feb 11 15:25:00 1994 EST correct (y/n) ?
8 If the date and/or time you entered is incorrect, enter n, followed by {RETURN}. The
system then returns you to Step 7. If the date and time you entered are correct, enter
y, followed by {RETURN}. The system continues.
***> From this point on, many system messages will be timestamped.
(TIME)
The word TIME in parentheses indicates a time message displayed by your system.
***
New character settings: erase = DEL kill = ^u intr = ~ quit = ^x
***
Note: The previous message indicates that pressing the {~} key causes a system
interruption which terminates the current process. The {DEL} key deletes and back-
spaces one character.
–––> Do you wish to verify the identity of the NAC Application Tape
(y/n) ?
Network Administration Center (NAC) Installation Guide Product release 2
Revision Serial#
0002 8988... .......
0001 RV J... .......
—continued—
New software installations
Blocks Size Vendor Description
––––––– ––––
2054325 0512 SEAGATE ST11200N
0000000 0000 TEAC MT–2ST/F50B
––––––––––––––––––
6-5