Table of Contents
Advertisement
Procedure 4-1
HP 700/32 workstation setup
Step
Action
1
Refer to the vendor's manual for installation instructions.
2
Power on the terminal and press the {Set-Up} key. Refer to your HP 700/32 user's
manual for instructions on setting up the workstation's options.
To move to the next set-up screen, press {Next Screen}. To move to the previous
set-up screen, press {Prev Screen}.
3
Ensure that the options match the following Global settings:
GLOBAL
Host Port
Background
Screen Saver
Refresh Rate
Key Click
Keyboard
Message Translations
Setup Translations
Clear Display
Clear Comm
ROM revision
*
Change this setting to match the keyboard language you are using.
**
This setting specifies the language of the HP 700/32 setup screens, but does
not affect the NAC screens.
*** This setting depends upon the version of terminal you are using.
4
To save the Global settings, press the [SAVE MENU] key.
HP 700/32 or 100% compatible
Perform Procedure 4-1 to set up an HP 700/32 or 100% compatible
workstation.
Network Administration Center (NAC) Installation Guide Product release 2
1
Dark
15 Min
72 Hz
No
U.S. *
English
English **
(not applicable)
(not applicable)
5181–5672–3014 ***
— continued —
Peripheral devices
4-9
Advertisement
Table of Contents
