Table of Contents
Advertisement
Precutover mode to Product mode
Procedure 10-3
Switching from Precutover mode to Product mode for NAC 2 systems
Step
Installer's action and system's response
1
Enter precut as the login ID when you log into the maintenance terminal.
Console login:
Once you have entered your response, the system displays:
Password:
2
Enter the password to log on. This password is supplied by your Northern Telecom
distributor.
Once you have entered the password, the system displays copyright and hardware
configuration information.
SYSTEM V/68 Release R3V7 Version 940208 M68040
NAC00
Copyright (c) 1984 AT&T
Copyright (c) 1985–1992 Motorola, Inc.
All Rights Reserved
***
erase = DEL kill = ^u intr = ^c quit = ^x
***
Note : The previous message tells you that the {CONTROL}{C} keys pressed simul-
taneously cause a system interruption which terminates the current process. The
DEL key deletes and backspaces one character.
The system displays the NAC Precutover mode's menu.
Network Administration Center (NAC) Installation Guide Product release 2
Follow Procedure 10-3 if you are switching from Precutover mode to
Product mode on a NAC 2 system.
—continued—
Operating modes
10-27
Advertisement
Table of Contents
