Northern Telecom NAC Installation Manual page 86

Procedure 3-1 (continued)
Configuring the MVME167-34 card
Step Installer's action and system's response
75 Enter 01.
The system displays the following prompt:
F-Page (VMEbus A24) Enable [Y/N] = ?
76 Enter y to enable the F-page address decoder.
The system displays the following prompt:
F-Page (VMEbus A24) Control = ?
77 Enter 02.
The system displays the following prompt:
ROM Speed Bank A Code = ?
78 Enter 04.
The system displays the following prompt:
ROM Speed Bank B Code = ?
79 Enter 04.
The system displays the following prompt:
Static RAM Speed Code = ?
80 Enter 00.
The system displays the following prompt:
PCC2 Vector Base = ?
81 Enter 05.
The system displays the following prompt:
VMEC2 Vector Base #1 = ?
Network Administration Center (NAC) Installation Guide Product release 2
—continued—
Hardware installation 3-61