Northern Telecom NAC Installation Manual page 82

Procedure 3-1 (continued)
Configuring the MVME167-34 card
Step Installer's action and system's response
47 Enter 00000000.
The system displays the following prompt:
Slave Address Translation Select #1 = ?
48 Enter 00000000.
The system displays the following prompt:
Slave Control #1 = ?
49 Enter 03FF.
The system displays the following prompt:
Slave Enable #2 [Y/N] = ?
50 Enter y to enable the slave address decoder #2.
The system displays the following prompt:
Slave Starting Address #2 = ?
51 Enter FFE00000.
The system displays the following prompt:
Slave Ending Address #2 = ?
52 Enter FFE1FFFF.
The system displays the following prompt:
Slave Address Translation Address #2 = ?
53 Enter 00000000.
The system displays the following prompt:
Slave Address Translation Select #2 = ?
Network Administration Center (NAC) Installation Guide Product release 2
—continued—
Hardware installation 3-57