Table of Contents
Advertisement
DEC VT420 or 100% compatible (Worldwide model)
1
Refer to the vendor's manual for installation instructions.
2
The video display terminal (VDT) is connected to the AM's VME
multiport cable using an NT8D96AE (AM) cable. Refer to the
appropriate port assignment table for valid port assignments.
3
Power on the terminal and push the setup key. Some VDTs have
on-screen cues for changing settings and moving between menus. The
VDT manual contains the definitive instructions on setting up the
workstation's options.
Figure 4-3 provides the details to set up a DEC VT420 (Worldwide
model) or 100% compatible VDT. Each directory shown in Figure 4-3
has its own screen and displays the correct setting for each field. If any
of the fields shown differ from those on your screen, cursor to the field
and press {ENTER} until the correct information is displayed. Complete
these procedures before powering on NAC.
Network Administration Center (NAC) Installation Guide Product release 2
Peripheral devices
4-7
Advertisement
Table of Contents
