Northern Telecom NAC Installation Manual page 257

7-14 Loading a new software release
Procedure 7-1 (continued)
Load New Software Release for a NAC 2 system
Step Installer's action and system's response
20 The system displays the following prompts.
The current Date and Time are 'Mon Feb 14 12:42:00 STD 1994'
Do you wish to change the current Date and Time (y/n) ?
If you don't wish to change the current date and time, enter n, followed by {RE-
TURN}. Go to Step 21.
If you wish to change the current date and time, enter y, followed by {RETURN}.
The system asks you to enter the correct date and time, where the first pair of num-
bers represent the month, the second pair of numbers represent the day, the third
pair represent the hour in the 24-hour time cycle, the fourth pair of numbers repre-
sent the minutes, and the last pair of numbers represent the last two digits of the
year. For example, if 0211152594 was entered, the system would ask you the follow-
ing question.
Are the new Date and Time 'Fri Feb 11 15:25:00 STD 1994', correct (y/n) ?
If the date and/or time you entered is incorrect, enter n, followed by {RETURN}. The
system then returns you to Step 20. If the date and time you entered are correct,
enter y, followed by {RETURN}. The system continues.
21 Loading System Language Strings...
Loading System Language Strings completed.
Starting NAC OSM logger, Please Wait...
OSM logging Stopped.
NAC OSM Logging Started.
NAC release 02.xx
The system is ready.
Console login:
553-4011-110 Standard 1.0 November 1994
Enter new Date and Time [mmddhhmmyy] :
—end—