Northern Telecom NAC Installation Manual page 104

4-8 Peripheral devices
Figure 4-3
DEC VT420 workstation (Worldwide model) setup
Set-Up Directory
Global Display
Clear Display
Set-Up = English *
Enable Sessions
Global Set-Up
To Next Set-Up
On Line S1 = Comm1
Comm1 = DEC–423 ***
Display Set-Up
To Next Set-Up
No Auto Wrap
No Cursor Block Cursor Style
Cursor Blink
Vertical Coupling
General Set-Up
To Next Set-Up
User Defined Keys Unlocked
Numeric Keypad
UPSS ISO Latin-1
When Available Update
Communications Set-Up
To Next Set-Up
XOFF at 128
Data Leads Only
No Auto Answerback
Modem High Speed = Ignore
Keyboard Set-Up
To Next Set-Up
No Auto Repeat
Character Mode
F1 = Hold F2 = Print
,< and .> Keys
Note: * This setting specifies the DEC setup language and does not affect the NAC screens.
** Change this setting to match the keyboard language you are using.
*** This setting depends on the port you are using on the back of the terminal. Refer to your terminal
guide for more information.
553-4011-110 Standard 1.0 November 1994
General Comm
Clear Comm Reset Session
North American Keyboard **
Disable Sessions
To Directory
CRT Saver
70 Hz
To Directory 80 Columns
Jump Scroll Dark Screen
6X24 pages 24 Lines/Screen
Page Coupling
To Directory VT400 Mode, 8 Bit Controls
User Features Unlocked
Normal Cursor Keys
VT420 ID
To Directory Transmit = 9600
8 Bits, No Parity
Disconnect, 2 s Delay
Answerback=
Modem Low Speed = ignore
To Directory Typewriter Keys
Keyclick Off
<X] Delete
F3 = Set-Up
<> Key
Printer Keyboard
Recall
Default
Exit Screen Align
Printer Shared
Interpret Controls
No Status Display
No Auto Resize Screen
No New Line
Receive = Transmit
1 Stop Bit
Limited Transmit
Caps Lock
Margin Bell Off Warning Bell High
Local Compose
F4 = Session
'~ Key
Tab
Save
8-bit Characters
No Local Echo
Not Concealed
Ignore Alt
F5 = Break