Northern Telecom NAC Installation Manual page 311

Procedure 9-1 (continued)
Platform upgrade from a NAC 1 system to a NAC 2 system
Step Installer's action and system's response
43 If you do not have a backup tape or wish to avoid installing your backup data, enter
c, followed by {RETURN}. The system displays the following message.
***> Continuing as a NEW INSTALLATION...
Go to Step 44.
If you have inserted the backup tape, enter y, followed by {RETURN}. The system
continues.
***> Checking for ACD–NAC Customer Data Backup Tape...
***> Customer Data Backup Tape is correctly inserted.
***> Continuing with the PLATFORM UPGRADE...
44
167 SCSI configuration
Device Addr Vers
–––––– –––– –––– –––––––– –––––––
Disk 00
Tape 40
Tape 50
This configuration is only an example. Your system may differ.
Enter <CR> to pause in a single user shell before init.
Default boot sequencing continuing...
The system is coming up. Please wait.
Node name set to NAC00
mount –f S51K /dev/usr /usr
Checking for system dump...
Network Administration Center (NAC) Installation Guide Product release 2
Revision Serial#
0002 8988... .......
0001 RV J... .......
0001 –005... .......
—continued—
Blocks Size Vendor Description
––––––– –––– ––––––––––––––––––
2054325 0512 SEAGATEST11200N
0000000 0000 TEAC MT–2ST/F50B
0000000 0000 ARCHIVEVIPER 150 2124
Platform upgrades 9-19