Entering The Adjust/Edh Adjustment Values - Minolta Di450 Service Manual

1.2.13

Entering the Adjust/EDH Adjustment Values

Rev. 1.1/10.00
1. Press the Stop key and, without any delay,
press the Start key.
2. Touch "EDH."
3. Touch each item, one at a time, on the Adjust/
EDH screen to display the corresponding
adjustment value.
4. Each time the adjustment value is displayed,
enter it on the Label affixed to the inside of the
Front Door.
Refer to the Table given below and make sure
that each value is entered at the correct column.
I-37
Note
Di450 / Di550