Installation; Unpacking - Minolta Di450 Service Manual

1.4 PF-208 Installation
1.4.1

Unpacking

1. Take the Bag of Accessories and Cabinet out of the Carton.
Check to see that the following item in the bag:
Label........................... 1
2. Peel off all the tapes from the cabinet.
Tapes
1.4.2 Fitting the copier to the cabinet
Di450 / Di550
Tapes
1. Take the Copier out of the carton.
2. While holding the Carrying Handles, lift the
copier up and onto the cabinet ensuring that
the Positioning Pins are securely located in
Pin
the holes in the base frame of the copier.
3. Using the four screws shipped with the
copier, secure the Paper Feed Cabinet to the
copier.
Screw (shipped with the copier) -4x8mm (4)
I-42 Rev. 1.1/10.00