7. Remove three screws and the PH Cooling Fan
Motor mounting bracket Assy.
8. Remove six screws and the mounting bracket.
4002D046AB
9. Remove the harness from two cord clamps and
one edge cover.
4002D047AC
10. Unplug two relay connectors and remove the har-
ness from the cord clamp.
4002D048AB
11. Swing down the Front Door and slide out the
Developer Unit.
12. Remove two thumbscrews and one bolt.
4002D049AB
13. Remove the PH Unit.
4002D050AB
D-21