Minolta Di450 Service Manual page 325

Hide thumbs Also See for Di450:

Table of Contents

7. Wind the hook end of the cable around the pulley

five turns counterclockwise, from the rear toward

the front side.

Make sure that no part of the cable rides on the other.

8. Slip the Cable Holding Jig onto the pulley to secure

the cable in position.

9. Mount the front and rear pulleys and bushings on

the shaft and install the shaft to the IR Unit.

10. Mount the Scanner Drive Gear on the shaft and

secure it in position with one screw.

11. Install an Allen wrench into the holes in the shaft

and the IR Base Plate.

12. Slide the front pulley and bushing to the front and

install one mounting screw.

Chapters

Table of Contents