Di450 / Di550
6. Press the Start key.
The machine automatically performs the
ATDC Level Adjustment.
7. After completion of the ATDC Level
Adjustment, touch "END."
8. Press the Panel Reset key.
9. Touch "Level History."
10. Write down the current value of the ATDC
Control onto the Label attached inside the
Upper Front Door.
Insert the toner bottle
11. With the side marked UP facing up, insert the
Toner Bottle into the Bottle Holder.
Insert the toner bottle after runnig the ATDC
level adjust!
I-8
NOTE
Rev. 1.1/10.00