Cleaning Of The Lower Synchronizing Roller; Removal Of The Synchronizing Paper Dust Remover; Removal Of The Transport Paper Dust Remover - Minolta Di450 Service Manual

Hide thumbs Also See for Di450:

Table of Contents

(12) Cleaning of the Lower Synchronizing Roller

1. Swing down the Transport Section Release Lever.

2. Using a brush or a vacuum cleaner, clean the

Lower Synchronizing Roller.

1. Swing down the Front Door and slide out the

Developing Unit.

2. Remove one screw and the Synchronizing Paper

Dust Remover Assy.

When only the Paper Dust Remover is to be replaced,

affix the new one along the reference line as shown on

1. Open the Upper Right Door.

2. Remove the Transport Paper Dust Remover Assy.

Table of Contents