Adjustment Of Single Feed Fd Reading Position - Minolta Di450 Service Manual

1.2.11

Adjustment of Single Feed FD Reading Position

Rev. 1.1/10.00
1. Touch "S-ADF Mode (FD)."
2. Insert the Chart shipped with the unit into the
Single Feed Tray.
Press the Chart up against the Rear Edge Guide
and insert it crosswise.
3. Touch "SAVE."
4. Touch "END."
If the "SAVE" key is not shown on the screen,
repeat the above steps.
5. Close the Single Feed Tray.
I-35
Note
Di450 / Di550