Trail Edge Erase - Minolta Di450 Service Manual

Hide thumbs Also See for Di450:

Table of Contents

Trail Edge Erase

Specification

3.0 ± 1.0 mm

This adjustment must be made after the PH Unit has been replaced and following Registra-

tion (CD/FD).

Adjustment Procedure

1. Call the Adjust mode to the screen.

2. Touch [Printer].

3. Touch [Trail Edge Erase].

4. Press the Start Key to let the copier produce a test pattern.

5. Check to see if width A on the test pattern is up to the specifications. If it is outside the

specified range, perform the following adjustment steps.

Width A on the test pattern output should fall within the

following range.

The measurement shall be taken at the center on the

trailing edge of the paper.

Trail Edge Erase

Setting Range

Table of Contents