Minolta Di450 Service Manual page 430

PF-208 Paper Take-Up Misfeed Troubleshooting Procedures
• Paper is not taken up at all.
Step
1 Paper meets product specifications.
2 Paper is curled, wavy, or damp.
3 Edge Guide and Trailing Edge Stop are at cor-
rect position to accommodate paper.
4 Paper Lifting Plate is dirty or deformed.
5 Paper Separator Pad is dirty with paper dust,
deformed, or worn.
6 Paper take-up guide plate is dirty or deformed.
7 Paper Take-Up Roll and Separator Roll are
dirty with paper dust, deformed, or worn.
8 rd
3 Drawer Paper Take-Up Motor turns when
the Start key is pressed with the 3
selected.
9 th
4 Drawer Paper Take-Up Motor turns when
the Start key is pressed with the 4
selected.
Check
rd
Drawer
th
Drawer
T-22
Result Action
NO Change paper.
YES Change paper.
Instruct user in correct
paper storage.
NO Set.
YES Clean or change.
YES Clean or change.
YES Clean or change.
YES Clean or change.
NO Correct drive coupling.
Change motor or Control
Board.
Change Master Board.
NO Correct drive coupling.
Change motor or Control
Board.
Change Master Board.