Minolta Di450 Service Manual page 206

Affixed position
25±5
Rev. 1.1/10.00
6. Connect the Cable to the HDD.
Make sure that the Cable is connected in the
correct direction.
7. Install the Gasket in the position shown in the
illustration.
Affix the gasket to the HDD mounting plate as
shown.
8. Connect Harness B as illustrated and secure
it in position using cord clamps (at seven
places).
9. After Harness B has been connected to the
PWB-R as illustrated, connect the cable of
the kit to the connector on the machine.
I-77
Note
Note
Di450 / Di550