13-1.Drawer In Position Detection - Minolta Di450 Service Manual

13-1. Drawer In Position Detection
When the drawer is slid into the copier, the light blocking plate blocks the Set Sensor. The
copier then knows that the drawer has been slid in position.
Drawer is slid out
PC10 (1st Drawer)
PC11 (2nd Drawer)
Drawer is slid in
CONTROL SIGNAL
PWB-A PJ3A-9A
PWB-A PJ3A-9B
M-46
1st Drawer Set Sensor
PC10
2nd Drawer Set Sensor
PC11
Blocked Unblocked WIRING DIAGRAM
H L
H L
4002M542AA
27 - D
27 - D