1.11.5
Attaching the DT-105
Rev. 1.1/10.00
1. Peel off the backing from three pieces of
Velcro and affix them onto the backside of the
DT-105.
2. Attach the DT-105 at the location shown.
If the DT-105 is affixed at a wrong place, it could
prevent the Multi Bypass Tray from being opened
or a D-103 from being installed.
If a D-103 has been installed
Make sure that the DT-105 is attached so that the
connector of the AC Adapter does not contact the
mounting bracket of the D-103.
I-89
Note
Di450 / Di550