1.7.7
CHECKING THE LARGE CAPACITY CASSETTE INSTALLATION
(C-306 / C-306L)
1.7.8
CHECKING THE SIDE-TO-SIDE IMAGE REGISTRATION
Di450 / Di550
2. Fan the Paper throughly and load it no higher
than the indication on the Label. (C-306)
(C-306L)
1. Slide the Large Capacity Cassette firmly
against the copier and visually check to see if
there is a gap between the Large Capacity
Cassette and copier.
2. If gap "A" or "B" is too wide, the Support Stand
was not installed correctly. Carry out
"Installing the Large Capacity Casette" on
page 2 again.
1. Access the Tech. Rep. Mode screen.
(Refer to the Service Manual for the
procedure.)
I-70
Rev. 1.1/10.00