Removal of the Image Processing Board
Cover
1. Remove the Rear Cover and Right Cover.
2. Remove the Original Glass and EDH Glass.
3. Remove eight screws and the CCD Unit Cover.
4002D043AB
4. Remove four screws and the cover on the left.
5. Remove three screws and the cover on the right.
4002D044AC
6. Remove three screws and the PH Cooling Fan
Motor mounting bracket Assy.
7. Remove six screws and the mounting bracket.
4002D046AB
8. Remove five screws and the Cover.
4002D238AC
9. Remove five screws and the Master Board Moun-
tain Bracket Assy.
4002D069AC
D-7