Safety Information - Minolta Di450 Service Manual

1.

SAFETY INFORMATION

Laser Safety
This is a digital machine which prints by means of a laser. There is no possibility of danger
from the laser, provided the machine is operated according to the instructions in this man-
ual.
Since radiation emitted by the laser is completely confined within protective housing, the
laser beam cannot escape from the machine during any phase of user operation.
This machine is certified as a Class 1 product. This means the machine does not produce
hazardous laser radiation.
CAUTION: The use of controls, adjustments or performance of procedures
other than those specified in this manual may result in hazardous radiation
exposure. Because of this, Minolta strongly recommends that you operate
your copy machine only as described in this documentation.
Internal Laser Radiation
Maximum Average Radiation Power: 13.6
Wavelength: 785 nm
This product employs a Class IIIb Laser Diode that emits an invisible laser beam.
The Laser Diode and Scanning Polygon Mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM.
Therefore, the print head unit should not be opened under any circumstances.
For United States
CDRH regulation
This copier is certified as a Class 1 Laser product under the Radiation Performance Stan-
dard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for
Laser products marketed in the United States and is reported to the Center for Devices and
Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Depart-
ment of Health and Human Services (DHHS). This means that the device does not produce
hazardous laser radiation.
µ
W at laser aperture of the print head unit
G-1