Minolta Di450 Service Manual page 216

330mm
Cord holder
Cord bushing
Rev. 1.1/10.00
7. Remove the knockout shown from the Right
Cover which has been removed in step 4.
8. Fit the Cord Bushing and Cord Holder that
come with the DT-105 to the Hookup Cord at
a location about 330 mm from the end of the
connector.
Make sure of the correct orientation of the Cord
Bushing and Cord Holder. Study the illustration.
9. Pass the Hookup Cord as illustrated.
10. Connect the Hookup Cord to the PJ311
connector on PWB-B.
I-87
Note
Di450 / Di550