Minolta Di450 Service Manual page 257

Touch Panel
Display
Peripheral Mode
(3) System Input
• This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size,
define the marketing area, and make other settings.
Touch Panel
Display
Change Fixed
Zoom
Paper Size Input
Marketing Area
Original Size
Detecting Option
Tel. # Input
Hard Disk
Setting (The default is
Select the type of external I/F operation.
Mode 1 External I/F operation mode 1
External I/F operation mode 2
Mode 2
Mode 3 External I/F operation mode 3
After the setting has been made, touch "END" and turn OFF and
ON the Power Switch.
Setting (The default is
Change a fixed zoom ratio to a desired value.
<Procedure>
1. Touch the key of the fixed zoom ratio to be changed.
2. Press the Clear key.
3. Enter the new ratio from the 10-Key Pad.
4. Touch "Input" to validate the new setting.
Set the paper size.
<Procedure>
1. Select the paper source.
2. Select the paper size.
3. Touch "END" to validate the new setting.
Set the marketing area.
MSJ
Select "ON" when the optional Original Size Detecting Sensor is
mounted.
ON
Enter the telephone number that will appear on the Touch Panel when
a malfunction occurs in the copier.
<Procedure>
1. Enter the phone number from the 10-Key Pad. Use the Interrupt
key to enter a hyphen "-."
2. Touch "END" to validate the phone number setting.
Select "ON" if a Hard Disk is mounted.
ON
S-26
Highlighted
Highlighted
MC ME
).
).
Other Areas
OFF
OFF