Removal Of The Developing Unit; Removal Of The Sub Hopper Unit; Removal Of The Fusing Unit - Minolta Di450 Service Manual

(6)

Removal of the Developing Unit

(7)

Removal of the Sub Hopper Unit

(8)

Removal of the Fusing Unit

1. Swing down the Front Door.
2. Swing down the Transport Section Release Lever.
4002D051AB
3. Loosen two screws and remove the Developing
Unit.
4002U072AB
1. Swing down the Front Door and slide out the
Developing Unit.
2. Unplug one connector and remove three screws
and the Sub Hopper Unit.
4002D053AA
1. Open the Left Door.
2. Swing Down the Front Door.
3. Remove one screw and slide out the Fusing Unit.
4002D054AC
D-22