Removal Of The Unit; Removal Of The Multi Bypass Unit; Removal Of The Suction Unit - Minolta Di450 Service Manual

Hide thumbs Also See for Di450:

Table of Contents

Removal of the Unit

1. Swing down the Front Door and slide out the Developer Unit.

2. Remove the Paper Dust Remover Assy.

3. Slide out the Fusing Unit.

4. Slide out the 1st and 2nd Drawers.

1. Open the Upper Right Door.

2. Remove two connectors and the cover.

3. Unplug two connectors.

4. Remove two screws and the Upper Right Cover.

When reinstalling the Upper Right Cover, Adjustment

of the Upper Right Door (Multi Bypass Unit).

5. Unplug two connectors from lower end of the Suc-

6. Swing the Transport Section Release Lever back to

its original position.

7. Pressing down the Transfer/Paper Separator Coro-

nas Unit, pull out of the copier.

Table of Contents