Orig. Size Adjust - Minolta Di450 Service Manual

Hide thumbs Also See for Di450:

Table of Contents

Orig. Size Adjust

Make this adjustment after any of the following procedures have been performed:

• Memory Clear

• The original size is incorrectly detected

• Replacement of the CCD Unit and Scanner parts

• An Original Size Detecting Sensor has been replaced or added

Adjustment Procedure

1. Place a blank sheet of A3 or 11 × 17 paper on the

Original Glass and lower the Original Cover.

2. Call the Tech. Rep. mode to the screen.

3. Touch [I.R. & EDH Check].

4. Touch [Function (I.R.)].

5. Touch [Orig. Size Adjust].

6. Press the Start Key to execute Orig. Size Adjust.

The Start key remains lit up orange while this function is being run and lights up green as

soon as the sequence is completed.

7. If the adjustment results have been made okay, touch [Save].

If the adjustment results have been NG, refer to "I/O Check List" of TROUBLESHOOTING.

Table of Contents