1.11.14
Initial Transmission
After the initial data setting has been completed, execute the Initial Transmission.
The DT-105 is connected to the Center via the telephone line and the Initial Infor-
mation is sent from the Center computer to the DT-105.
Be sure to make a telephone call to the Center before executing the Initial
Transmission. After completion of the Initial Transmission, check that the data is
correctly sent to the Center.
Di450 / Di550
4. Touch "END."
Note
1. Touch "Initial Transmission."
2. After completion of the Initial Transmission,
check that the message "End of normal data
trans." is shown on the Display.
Condition
Line is busy
Max. trial number reached.
Connection failed.
Connected.
End of normal data
transmission.
I-98
Not answering.
The other line is busy.
DT modem error.
Dialing.
DT Connection failed.
Rev. 1.1/10.00