Disassembly Of The Multi Bypass Unit - Minolta Di450 Service Manual

Hide thumbs Also See for Di450:

Table of Contents

(17) Disassembly of the Multi Bypass Unit

5. Remove four Suction Belts.

6. Remove the Suction Roller as shown on the left.

1. Remove the Right Door.

2. Remove four screws and the Separator Guide

3. Remove the Spring.

When reinstalling the Spring, place it so that its close-

coiled end faces the Separator Unit.

4. Snap off the C-clip and remove the Separator Assy.

Table of Contents