Rev. 1.1/10.00
3. Using the four screws shipped with the
copier, secure the Paper Feed Cabinet to the
copier.
Screw (shipped with the copier) -4x8mm (4)
4. Hook the cord of the cabinet at a catch
provided on the copier and plug in the
connector.
5. Install the Harness Cover shipped with the
copier.
Screw (shipped with the copier) -4x10mm (1)
For checking the Side-to-Side Image
Registration (Duplex Unit), refer to the Di450/
Di550 Unpacking/Setting-Up Instructions.
I-45
Di450 / Di550