Removal Of The Ir Unit - Minolta Di450 Service Manual

Hide thumbs Also See for Di450:

Table of Contents

Removal of the IR Unit

1. Swing down the Front Door and slide out the Developer Unit.

2. Remove the Right Door, Left Door, Rear Upper Cover, Rear Cover and Control Panel.

3. Slide out the Fusing Unit.

4. Remove four screws and the Cover.

Do not remove the belt mounting screw on the cover.

5. Unplug two connectors, remove four screws and

remove the Main Hopper Unit.

6. Remove three screws and the PH Cooling Fan

Motor mounting bracket Assy.

7. Remove six screws and the mounting bracket.

8. Remove the Original Grass and EDH Glass.

9. Remove eight screws and the CCD Unit Cover.

10. Remove four screws and the Cover.

Table of Contents