Developing Unit; Remove Of The Developing Unit - Minolta Di450 Service Manual

Hide thumbs Also See for Di450:

Table of Contents

DEVELOPING UNIT

1. Swing down the Front Door and slide out the

Developing Unit.

2. Move the PC Drum Charge Corona to the rear,

raise it, and take it off.

3. Loosen the two screws of the PC Drum stopper

and remove the PC Drum stopper.

4. Remove the PC Drum.

• When reinstalling the PC Drum, refer to the illustra-

tion on the left and make sure of the correct direction

of installation. Be also sure to hold the PC Drum on

both sides with care not to touch the surface of the

drum with bare hands.

• When the PC Drum has been replaced, clear the

counts of "PC Drum 1", "PC Drum 2" and "PC Drum

3" of "PM" of "Counter" available from the Tech. Rep.

5. Remove two screws and the Developing Unit Front

Table of Contents