6. Remove two screws and the Stopper and Devel-
oper Scattering Prevention Plate.
4002D125AB
7. Remove two screws and the Cleaning Blade.
4002D127AB
NOTE
When reinstalling the Cleaning Blade, press the blade
tightly up against the mounting bracket.
1136D173AA
8. Remove two screws, unplug one connector, and
remove the ATDC Sensor.
4002D246AA
9. Unplug one connector.
10. Remove three screws and the PC Drum Paper Fin-
ger Holder Assy.
1156D061AA
D-48