1.2.3
Installation
Di450 / Di550
1. Install the Flat Springs (two) at the locations
shown in the illustration. For particular areas
only.
Make sure that the Flat Springs are installed in
the correct direction.
2. Screw the Shoulder Head Screws (two) at the
locations shown in the illustration.
3. Temporarily mount the Electronic Document
Handler onto the machine as illustrated.
Use care not to let the Electronic Document
Handler drop as it is insecure yet.
4. Secure both Hinges of the Electronic
Document Handler with Shoulder Head
Screws (two).
Use care not to let the Electronic Document
Handler drop as it is insecure yet.
I-26
Note
NOTE
NOTE
Rev. 1.1/10.00