Minolta Di450 Service Manual page 254

Touch Panel
Display
Hard Disk Format Formats the Hard Disk.
The Touch Panel shows the percentage of processing completed.
If formatting has been normally completed, the panel gives the mes-
sage of "OK"; if it has been abnormally terminated, the panel gives
the message of "NG" together with the corresponding malfunction
code.
<Procedure>
• Press the Start key to start the formatting sequence.
Hard Disk Check Checks for proper connection and read/write operation of the Hard
Disk.
The Touch Panel shows the percentage of sequence completed. If the
check has been completed okay, it gives the message of "OK"; if a
fault was encountered, it gives the message of "NG" together with the
corresponding malfunction code.
<Procedure>
• Press the Start key to start the check sequence.
ECC Check Checks for proper connection of the ECC.
The Touch Panel shows the percentage of sequence completed. If the
check has been completed okay, it gives the message of "OK"; if a
fault was encountered, it gives the message of "NG" together with the
corresponding malfunction code.
<Procedure>
• Press the Start key to start the check sequence.
Date/Time Check Checks for the current time-of-day and date.
Operation
S-23