9. Remove four harness holders.
10. Remove the Upper Fusing Roller Heater Lamp har-
ness from one wiring saddle.
11. Unplug two connectors of the Heater Lamp on the
rear.
12. Remove the Upper and Lower Fusing Roller
Heater Lamp harnesses from three edge covers.
4002D157AB
13. From the front side, slide out the Upper and Lower
Fusing Roller Heater Lamps.
4002D158AB
14. Unplug one Thermistor connector.
15. Remove the Thermistor harness from the harness
guide.
16. Remove one screw and the cord.
4002D159AD
17. Remove two screws and the Harness Guide.
4002D160AB
18. Remove two screws and the Upper Cover.
4002D161AA
D-63