Di450 / Di550
2. Loosen the three screws shown and adjust
the position of the Electronic Document
Handler as detailed below.
3. If the image deviates as shown, push the front
left side of the Electronic Document Handler
toward the rear.
If the image deviates as shown, push the front
right side of the Electronic Document Handler
toward the rear.
4. Tighten the three screws shown.
5. Reinstall the Rear Cover (three screws).
Note that the right screw, looking the machine
from the front side, is of a different kind.
I-30
Note
Rev. 1.1/10.00