Adjustment Of Original Detection - Minolta Di450 Service Manual

1.2.12

Adjustment of Original Detection

Di450 / Di550
1. Press the Panel Reset key to return to the
Tech. Rep. mode screen. Then, touch "I.R. &
EDH Check."
2. Touch "Function (I.R.)."
Make sure that the Electronic Document Handler
is closed
3. Touch "Orig. Size Adjust."
4. Press the Start key.
5. Touch "SAVE."
If the "SAVE" key is not shown on the screen,
repeat the above steps.
6. Touch "END."
7. Press the Panel Reset key.
I-36
Note
Rev. 1.1/10.00