After Dev. (C/M/Y/Bk) Has Been Changed (Atdc Sensor Adjust (Auto) Aidc Sensor Adjust (Auto) Aidc Offset Black Atdc Adjust - Minolta CF910 Service Manual

AFTER DEV. (C/M/Y/Bk) HAS BEEN CHANGED
(2)
(ATDC Sensor Adjust (Auto)
Offset Black ATDC Adjust)
Note
Although functions are available to perform ATDC Sensor Adjust (Auto), AIDC Sensor
Adjust (Auto), AIDC Offset, or Black ATDC Adjust individually, perform "After Dev. (C/M/Y/
Bk) has been changed" that covers all these in a given sequence.
AIDC Sensor Adjust (Auto)
1. Open the Front Door.
2. Press the Stop key, 0, Stop key, 2, in that
order, to set the copier into the Developer
Change mode.
3. Close the Front Door.
4. Select "After Dev. (C/M/Y/Bk) has been
changed" and set the copier into the
ATDC Sensor Adjust (Auto) mode.
1154D099CA
5. Touch "On" for the color to be adjusted
and press the Start key.
1154D100CA
6. After the adjustment has been made, the
results are displayed on the Touch Panel.
If you accept the results, select "On" to
enter the reference value.
1154D268CA
7. After ATDC Sensor Adjust (Auto) has
been completed, touch "Ex." to set the
copier into the AIDC Sensor Adjust (Auto)
mode.
8. With the AIDC Sensor Adjust (Auto)
screen on the Touch Panel, press the
Start key. This lets the copier start an
automatic adjustment sequence.
1154D101CA
D-135
AIDC