Minolta Di450 Service Manual page 261

Touch Panel
Display
PM
Consumables Enter the count of the Waste Toner and Web Roller counters. When
the count reaches the set value, the maintenance code is displayed.
<Procedure>
1. Touch "Set".
2. Press the Clear key to clear the current value.
3. Enter the value from the 10-Key Pad.
4. Touch "END".
Trouble Counts the number of malfunctions that have occurred at different
parts of the copier.
Display
Staple 1 No. of stapling sequences performed
Staple 2 No. of stapling sequences performed (FN-105)
Punch No. of holes made (FN-105)
Sort/Group No. of copies fed out in the Sort/Group mode
Trans./Sepa. pass No. of times a sheet of paper is fed through
Ozone Filter No. of times a sheet of paper is fed through
See MAINTENANCE SCHEDULE (machine/options) for the appli-
cable parts.
Web: Maintenance code "M3"
Description Maintenance code
45 cpm
Initial set
value
55 cpm
If the initial
When the count reaches
set value is
the set value
changed
Waste Toner: Maintenance code "M2"
Description Maintenance code
45 cpm Approx. 220 k 45 cpm
Initial set
value
55 cpm Approx. 270 k 55 cpm
45 cpm
If the initial
set value is
changed
55 cpm
Press the Interrupt key to undo the clearing operation, restoring
the original value.
Malfunction
Description
Code
C0000 Main Drive Motor
C0010 PC Drum Drive Motor
C0040 Suction Fan
C0044 EDH Cooling Fan
S-30
Setting
Description
460 k 45 cpm
470 k 55 cpm
45 cpm
55 cpm
The set value -
45 cpm
Approx. 20 k
The set value -
55 cpm
Approx. 30 k
Malfunction
Code
C004C
C0045
C0046
C0047
Machine stop
480 k
500 k
480 k
500 k
Machine stop
Approx. 240 k
Approx. 300 k
Set value
Set value
"-": Subtract
Description
Ventilation Fan
Image Unit Cooling Fan
PH Cooling Fan 1
PH Cooling Fan 2