Minolta Di450 Service Manual page 264

Touch Panel
Display
Scanning Check Check the operations from image scanning to image processing.
Normal: OK: Abnormal: NG
See the following for details of "NG" display
Orig. Size Adjust Adjusts the threshold of original detection level.
Function (EDH) Displays the screens used to adjust and check the EDH.
Position./Zoom Adjusts the zoom ration and the scanning position in the FD direction
(FD) when the EDH is used.
Position (CD) Adjusts the scanning position in the CD direction when the EDH is
used.
S-ADF Mode (CD) Adjusts the scanning position in the CD direction for a single feed
scan.
S-ADF Mode (FD) Adjusts the scanning position in the FD direction for a single feed
scan.
Skew Check Checks the EDH for correct alignment.
I/O Check (IR) Checks the function of sensors.
I/O Check (EDH) Checks the function of sensors.
Tech. Rep. Choice Displays the screens for setting the various Tech. Rep. functions.
Erasure Width Set the fixed erase width from the scales in the CD and FD directions.
ID in Photo Mode This function does not function because it is applicable on a case-by-
case basis.
EDH Paper Makes a paper passage check through the EDH.
Passage <Procedure>
1. Select the paper passage mode.
2. Place paper on the Document Feed Tray.
3. Press the Start key.
(7) ROM Version
• Shows the ROM versions.
Display
Optical
Analog Check the optical system, change PWB-IA or B.
Digital Change PWB-B.
Made for correct alignment of the optical axis.
For details, see DIS/REASSEMBLY, ADJUSTMENT.
For details, see the relevant option service manual.
For details, see the relevant option service manual.
For details, see the relevant option service manual.
For details, see the relevant option service manual.
For details, see the relevant option service manual.
For details, see the relevant option service manual.
For details, see DIS/REASSEMBLY, ADJUSTMENT.
S-33
Setting
Action
0 to 5 ( )
3 mm