P12 Group--Profibus Communication - INVT Goodrive3000 Series Operation Manual

Goodrive3000 series medium voltage VFD
Function
code
P11.06
The function code is used to select the communication processing action.
0: Respond to write operations. The PWM rectifier responds to both read and write commands from the upper computer.
1: Not respond to write operations. The PWM rectifier does not respond to the write commands, but responds only to the
read commands from the upper computer. This setting can improve the communication efficiency.
Function
code
P11.09
P11.10 communication baud
P11.11 communication fault
P11.12
P12 group––PROFIBUS communication
Function
code
P12.00
P12.01
The function code is used to identify the address of the current PWM rectifier in serial communication.
Note: The option 0 indicates a broadcast address, which means the rectifier only receives and runs the broadcast
commands from the host controller but not respond to the host controller.
Function
code
P12.02
P12.03
P12.04
P12.05
P12.06
P12.07
P12.08
P12.09
P12.10
Name
0x00–0x11
Ones place:
0: Respond to write operations
Communication
1: Not respond to write operations
processing action
Tens place:
0: Reserved
1: Reserved
Name
CANopen
communication 0–127
address
0: 50K BPS
CANopen 1: 125K BPS
2: 250K BPS
rate 3: 500K BPS
4: 1M BPS
CANopen
0.0 (invalid); 0.1–100.0s
delay
CANopen 0: Common control protocol
communication 1: Internal master/salve
protocol communication protocol
Name
Module type 0: PROFIBUS
Module address 0–127
Name
Received PZD2
Received PZD3
0: Disable
Received PZD4
1: DC voltage setting
Received PZD5
2–4: Reserved
Received PZD6
5: AO setting 1
Received PZD7
6: AO setting 2
Received PZD8
7–13: Reserved
Received PZD9
Received PZD10
Description
Description
Description
Description
-40-
Goodrive3000 rectifier
Setting range Default
0x00–0x11 0x00
Setting range Default
0–127
1
0–4 3
0.1–100.0
0.0s
0–1
0
Setting range Default
0–1 0
0–127 2
Setting range Default
0–13 0
0–13 0
0–13 0
0–13 0
0–13 0
0–13 0
0–13 0
0–13 0
0–13 0