INVT Goodrive3000 Series Operation Manual page 106

Goodrive3000 series medium voltage VFD
Function
code
For details, see fault information.
Function
code
Running frequency at present
P07.33
Ramp reference frequency at
P07.34
P07.35 Output current at present fault
P07.36 Output current at present fault
P07.37 Bus voltage at present fault
P07.38
P07.39
Name
43: Motor overtemperature fault (Ot)
44: SCR fault (SCE)
45: Slave fault (SF) (valid when the
VFD is the master in master-slave
control mode)
46: Slave speed deviation fault
(SdEu) (valid when the VFD is the
slave in master-slave torque mode)
47: Phase lock failure (PLLF)
48: Optical fiber offline fault (FCE)
49: FPGA no-program fault (FPGA)
50: Low temperature fault (Lt)
51: Hardware overcurrent (HoC)
52: Leakage current fault (PIF)
53: Runaway fault (OS)
54: Large DC for long periods (LDC)
55: Protection against PID feedback
low limit (LF)/hardware overvoltage
fault (Hov)
Pre-alarm:
1: Motor OH pre-alarm (A-Ot)
2: Overload pre-alarm (A-OL)
3: PROFIBUS communication
pre-alarm (A_dP)
4: RS485 communication pre-alarm
(A- CE)
5: Ethernet communication pre-alarm
(A-nEt)
6: CAN communication pre-alarm
(A_CAn)
7: DEVICE_NET communication
pre-alarm (A-dEv)
8: Reserved
Name
fault
present fault
Upper half bus voltage at
present fault
Lower half bus voltage at
Description
Description
-100-
Goodrive3000 inverter
Setting range Default
Setting range Default
0.00Hz
0.00Hz
0V
0.0A
0.0V
0.0V
0.0V