INVT Goodrive3000 Series Operation Manual page 28

Goodrive3000 series medium voltage VFD
The running commands are controlled through keypad keys, such as the RUN and STOP/RST keys.
1: Terminal ("LOCAL/REMOT" indicator blinking)
The running commands are controlled through multi-function input terminals.
2: Communication ("LOCAL/REMOT" indicator on)
The running commands are controlled by the upper computer in communication mode.
Function
code
P00.02
The function code is used to select the mode that PWM rectifier controls communication commands.
Note: The options 1, 2, and 3 are add-on functions and are available only when corresponding expansion cards
are configured.
Function
code
P00.03
The function code is used to select the running mode of the PWM rectifier.
0: COSφ mode. The reactive current is determined by the power factor.
Note: The mode 0 has voltage loop and the parameters in P03 group should be set for mode 0.
Function
code
DC bus voltage setting
P00.04
P00.05 DC bus voltage setting 300.0–2100.0V
When P00.04=1, P00.05 is set through the keypad.
Mapping between voltages and DC bus voltages
Model
660V
1140V
3300V
Function
code
P00.08
Function
code
P00.09
Name
0: RS485
Communication 1: PROFIBUS
mode of running 2: Ethernet
commands 3: CANopen
4–6: Reserved
Name
0: COSφ
Running mode
1–2: Reserved
Name
0: Automatic
1: Keypad
method
2: Reserved
Factory default DC bus voltage
Name
Resonance
suppression factor
Name
Overmodulation 0: Disable
selection 1: Enable
Description
Description
Description
(P00.05)
1050V
1850V
5000V
Description
0–10
Description
-22-
Goodrive3000 rectifier
Setting range Default
0–6 0
Setting range Default
0–2 0
Setting range Default
0–2 1
Model
300.0–2100.0
depended
Overvoltage point
1200V
2150V
6000V
Setting range Default
0–10 0
Setting range Default
0–1 1