Ethernet Communication; Operation Procedure; Related Function Codes - INVT Goodrive3000 Series Operation Manual

Goodrive3000 series medium voltage VFD

10 Ethernet communication

The VFD has been integrated with Ethernet communication function. Ethernet communication can be implemented by
connecting the VFD to the upper computer that hosts the Ethernet upper computer monitoring software (available at
www.invt.com) with a standard Ethernet RJ45 cable.
With the host computer, all parameters in the VFD can be easily set, uploaded, downloaded, while the waveforms of up to
100+ messages can be easily monitored in real time.

10.1 Operation procedure

See the operating manual of INVT Workshop upper computer monitoring system.
Goodrive3000 series VFD can save the waveform information of 0.2 seconds before the last stop failure, which can be
extracted by the software of the host computer for fault cause analysis.

10.2 Related function codes

Related function codes for rectifier unit
Function
code
P13.00
communication rate
P13.01
P13.02
P13.03
P13.04
P13.05
P13.06
P13.07
P13.08
P13.09
P13.10
P13.11
P13.12
Related function codes for inverter unit
Function
code
P16.00
communication rate
P16.01
P16.02
P16.03
Name
0: Self adaptive
1: 100M full duplex
Ethernet
2: 100M half duplex
3: 10M full duplex
4: 10M half duplex
IP address 1 0–255
IP address 2 0–255
IP address 3 0–255
IP address 4 0–255
Subnet mask 1 0–255
Subnet mask 2 0–255
Subnet mask 3 0–255
Subnet mask 4 0–255
Gateway 1 0–255
Gateway 2 0–255
Gateway 3 0–255
Gateway 4 0–255
Name
0: Self adaptive
1: 100M full duplex
Ethernet
2: 100M half duplex
3: 10M full duplex
4: 10M half duplex
IP address 1 0–255
IP address 2 0–255
IP address 3 0–255
Description
Description
-228-
Ethernet communication
Setting range Default
0–4 0
0–255 192
0–255 168
0–255 0
0–255 1
0–255 255
0–255 255
0–255 255
0–255 0
0–255 192
0–255 168
0–255 1
0–255 1
Setting range Default
0–4 0
0–255 192
0–255 168
0–255 0