Monitor System Log Messages - Juniper EX9214 Hardware Manual

Table 62: Backup Routing Engine Alarms
Chassis Alarm Condition
Component
Multibit The backup Routing Engine
Memory ECC reports a multibit ECC error.
SEE ALSO
Craft Interface in an EX9200 Switch | 29
Understand Alarm Types and Severity Levels on EX Series Switches

Monitor System Log Messages

IN THIS SECTION
Purpose | 301
Action | 302
Meaning | 305
Purpose
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to filter and view system log messages for EX Series switches.
(Continued)
Alarm Remedy
Severity
Minor
•
Reboot the system with the board reset
(yellow)
button on the backup Routing Engine.
•
If the alarm recurs, open a support case
using the Case Manager link at
www.juniper.net/support/
1-888-314-5822 (toll free, US & Canada) or
1-408-745-9500 (from outside the United
States).
301
https:/ /
or call