Multi-Purpose Application - Parameters List - Eaton PowerXL DM1 Series Applications Manual

Multi-purpose application - parameters list

On the next pages you will find the lists of parameters
within the respective parameter groups. Each parameter
section within the table lists:
Parameter code (location indication on the keypad;
•
shows the operator the present parameter number);.
Parameter name;
•
ID (number of the parameter);
•
and where applicable:
Minimum value and units;
•
Maximum value and units;
•
Default value and units;
•
Options (when available); and
•
Description of the parameter.
•
Table 54. Monitor (Cont.).
.
M1 - standard.
M1.1
Output frequency
Hz
Minimum value:
Description: Output frequency (Hz).
M1.2
Frequency reference
Minimum value: Hz
Description: Reference frequency (Hz).
M1.3
Motor speed
Minimum value: rpm
Motor output speed (rpm).
Description:
M1.4
Motor current
Minimum value: A
Motor output current RMS (Amps).
Description:
M1.5
Motor torque
Minimum value: %
Percent motor torque calculated from nameplate values and measured motor current (%).
Description:
M1.6
Motor power
Minimum value: %
Description: Percent motor power calculated from nameplate values and measured motor current (%).
M1.7
Motor voltage
Minimum value: V
Description: Output ac motor voltage (Vac).
M1.8
DC-link voltage
Minimum value: V
Description: DC bus voltage (Vdc).
M1.9 Unit temperature
Minimum value: °C
Description: Heat sink temperature (deg C).
POWERXL DM1 SERIES VARIABLE FREQUENCY DRIVES
Hz
Maximum value:
Maximum value: Hz
Maximum value: rpm
Maximum value: A
Maximum value: %
Maximum value: %
Maximum value: V
Maximum value: V
Maximum value: °C
Chapter 7- Multi-purpose application
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
Default value:
MN040049EN—September 2021 www.eaton.com
ID 1
Hz
ID 24
Hz
ID 2
rpm
ID 3
A
ID 4
%
ID 5
%
ID 6
V
ID 7
V
ID 8
°C
147